Your Best Choice for Furnace and Air Conditioning Repair in West Mifflin, PA

I was called to a home for an ac that wasn't bringing the temperature down inside. After evaluating the system i found the capacitor had failed and the outdoor coil was very dirty. With the level of work that the customer chose I was able to clean the whole unit thoroughly and replace the capacitor along with several other electrical controls and connectors. I also added a surge protector to the system. The ac unit is now cooling efficiently.

I was called to a home for an ac inspection. After evaluating the system i was able to determine it was operating at peak efficiency. The system is operating and cooling very well during these hot days.

I was called to a home for an inspection of an air conditioner. After inspection I found that the air conditioner was working well. I noted while in the basement that the expansion tank for the water heater had failed. The tank had failed due to high pressure in the house and no pressure regulator present. After speaking with the customer, we were able to find a plan to get the pressure regulator installed and the expansion tank replaced so that their water heater will last longer as well as all their fixtures.

I was called to a home for an air conditioner that wasn't cooling well. After evaluating the system i found that the filter was dirty and the outdoor unit had a severely clogged coil. I performed a deep chemical clean on the outdoor coil and unit and replaced the filter. The system is now cooling and running efficiently.

I was called to a home to complete an ac inspection. After evaluating the system I was able to determine that the system was operational and cooling efficiently.

I was called to a house because the home owner received a letter from the water authority about high water usage. Upon arrival, I found that the toilet was leaking through. I was able to replace the internal components and test the system. The system was operational.

I was called to a home for an air conditioner that was not working. After evaluating the system, I determined that the contactor had an internal short. I replaced the contactor and performed safety testing. The system is now operational and cooling.

I was called to a house for an airconditioner making a loud noise and not cooling. After checking the system, i was able to find that a piece of antivibration foam was wedged in the fan housing, preventing the fan from running. I removed the foam and performed safety testing. The system is now functional and cooling.

I was called to a customer's home to repair a furnace that was not heating. Upon inspection, I found a mechanically failed inducer motor, a leaking gas valve, a leaking gas shutoff, improperly piped gas line, and an electronically failed capacitor. After replacing all failed components and bringing the gas line up to code, the furnace was operational and safe.

I was called to a home to repair a gas furnace that was not working. Upon arrival, I found that the gas valve had failed mechanically. I replaced the gas valve and cycled the furnace to ensure it was working properly. I then tested the system to ensure it was safe and operational.

was called to a house for a furnace not heating, found a dirty flame sensor, cleaned and tested, system operating normally, homeowner satisfied.

I was called to a home to repair a furnace that was not blowing air. Upon arrival, I found that the blower motor was faulty. I replaced the motor and installed a new capacitor. I also cleaned the furnace and addressed any wiring connections that were loose. After completing the repairs, the system was operational.

I was called to fix a house trap that was not working properly. I inspected the trap and found that it was clogged with debris. I removed the debris and cleaned the trap. I also checked the pipes for any leaks and repaired them if necessary.

I was called to a customer's home to repair their furnace. Upon inspection, I found that the furnace was not heating. I diagnosed the issue as a drain issue that required obsolete parts. I installed a new furnace and the customer is now enjoying the warmth of a properly heating home.

I completed a furnace inspection and found that the system was operational. I tested the thermostat, checked the ignitor, performed safety testing and inspected the burners for proper operation. The customer was satisfied with the service and thanked me for my help.

Garbage disposal and water line repair

I was called to a home in the suburbs to repair a leaky water heater. Upon arrival, I found that the leak was coming from a leaky nipple on the water heater. I replaced the nipple and tested the water heater to ensure it was working properly. The homeowner was very satisfied with the work and thanked me for my help.

I checked the water heater, did a safety check and inspection, flushed the tank, and fixed a leaking relief valve. I also found a water leak and fixed it.

I was called to a home to repair a furnace that was leaking water. I found that the water was coming from a cracked pipe that was leaking inside the furnace. I repaired the pipe and the furnace was working properly again.

I was called to a home to repair a furnace that was not heating. Upon arrival, I found that the combustion and ignition safety system needed to be repaired. I replaced the faulty components and tested the system to ensure it was working properly. The homeowner was very grateful for my quick and efficient service.

The customer reported that the furnace was not heating properly and the room was cold. I diagnosed the issue as a faulty thermostat and replaced it. The furnace is now heating properly.

I am an HVAC contractor. I was called to inspect a furnace, check it for safety, and perform a safety check. The customer was glad to hear that everything is working properly.

I was called to a home to repair a furnace that was blowing cold air. Upon inspection, I found that the ignitor was not working. I replaced the ignitor and performed a safety check. The furnace is now working properly.

I was called to a home to repair a heating system that was not producing any heat. Upon inspection, I found that the spark module had failed. I replaced the module and tested the system. The customer is glad to have heat again.

I recently completed a furnace check and safety check for a client. I inspected the furnace, checked the safety controls, and made any necessary adjustments. I also provided the client with information on how to maintain their furnace and keep it running efficiently.

I was called to a home to repair a furnace that was not heating. I found that the flame sensor was not working properly. I replaced the flame sensor and performed safety testing to ensure the furnace was working properly.

I was called to a home to fix the air conditioner. I found that the capacitor had gone bad and replaced it. The system is now operational.

I was called to a job where the air conditioner was not cooling properly. I arrived at the job site and found that the capacitor was blown and the contactor was not working properly. I replaced the capacitor and the contactor, tested the system to ensure it was working properly. The customer was happy with the work and I was able to get the job done quickly and efficiently.

I was called to a home due to the pipes being old and leaking. The homeowner wanted to upgrade to more durable and efficient pipes. I removed the old pipes and installed new ones, making sure to properly seal all the connections. The homeowner was very pleased with the results and thanked me for my hard work.

I was called to repair an AC unit that was not cooling. I found a minor short in the duckwork and repaired it.

I was called to a home with an AC unit that wasn't cooling. Upon inspection, I found a severely clogged out door coil and an electronically failed capacitor. I sprayed the coil and replaced the capacitor.

I was called to a home where the furnace was not heating. Upon inspection, I found that the blower motor was not working properly. I replaced the motor and the furnace was working again.

I was called to a home to repair a furnace that was not working. Upon arrival, I found that the circuit board had failed. I installed a new circuit board and the furnace was working again.

I repaired a Lennox furnace that was shutting off due to a faulty thermocouple. I also inspected a Bradford white water heater and replaced the anode rod. Everything is working properly.