Your Best Choice for Furnace and Air Conditioning Repair in Greensburg, PA (2)

I inspected, cleaned, and repaired an air conditioner. I calibrated the refrigerant system, restored it to a clean condition, and upgraded the start-assist system. I also renovated the evaporator and condenser coils.

I'm a professional HVAC technician. I just finished checking out an AC unit, cleaning it, and making sure the whole house is nice and cold with a good running system.

I inspected a water heater to ensure it was functioning properly and safely. I checked the pressure relief valve, temperature and pressure settings, and electrical connections. I also tested the drain valve to ensure it was working correctly.

I inspected a water heater, repaired a leak, and added a regulator, back flow, and expansion tank. I capped the gas line properly, removed flexy shark bites, tested the system, and found it to be in proper working order.

I was called to a job where a plumber is needed. I arrived at the job site and found that the pressure regulator was not working properly. I diagnosed the problem and replaced the regulator, which resolved the issue. The customer was very happy with the service and thanked me for my help.

The furnace was not heating. I replaced the control board, ignitor, inducer, control, and wiring harness. I tested the furnace and it was working properly.

I was called to flush a tankless water heater and repair a gas fireplace that wasn't heating. I was able to fix the gas fireplace and flush the tankless water heater. The customer was appreciative and thanked me for my services.

I was called to a home to repair a furnace that wasn't heating. I arrived and found the sensor was not working. I replaced the sensor and the furnace was up and running in no time.

I was called to repair a toilet and water heater. I diagnosed the issue as a faulty water heater and tuned it. I fixed two toilets, a faucet, and calibrated a Pressure reducing valve on the main water system.

I was called to repair a leak in a water system. I found the leak and repaired it. I also upgraded the safety inspection to a visual pressure monitor. I performed a performance and safety test on the system.

I was called to a home to install a toilet. I removed the old toilet and installed the new one. I also replaced the wax ring and cleaned up the area.

I performed a furnace inspection on two units, one system is operating as it should. I installed a condensate pump for the other unit and removed old drain piping. The system is operational.

The air conditioner was not cooling, so I installed a new TXV and repaired the solder joints on the system. The system is now cooling again.

I was called to a home to repair an air conditioner that was not cooling. Upon inspection, I found that the wiring had been damaged, and the capacitor had burned out. I replaced the damaged sections of wiring and the burnt capacitor, and then reinstalled the wiring and performed safety testing. The system is operational again.

I was called to a home to fix an AC that wasn't working. I found that the coil was dirty and had to be cleaned. I also tightened all the wiring connections. The unit is now cooling properly.

I was called to a home to repair a broken air conditioner. I found that the system was low on Freon and recharged it. The customer is pleased to have the air conditioner cooling again.

I inspected an Arco Aire AC unit for safety and found that it was in good working condition. The homeowner was pleased to hear everything is functioning properly.

I was called to a home to repair a furnace that was not producing heat. Upon inspection, I found that the drain was clogged with debris. I removed the clog and the furnace was working again.

I was called to a home to repair a furnace that was not working. The ignitor was bad on the Bryant Furnace. I replaced the ignitor with a new one. The furnace is now functioning properly.

I was called to a home to repair a furnace that was not heating properly. Upon inspection, I found that the condensate drain was clogged. I removed the drain and cleaned it out, and the furnace was working again.

I was called to fix a leaky shower. I found that the adapter was leaking. I tightened the adapter to the brass fitting and reinstalled the shower head.

I am a highly skilled and experienced plumber. I was called to fix a water leak in a home. I found that the pipe had burst and was causing a significant leak. I then proceeded to remove the old pipe and install a new one. I made sure to use the proper tools and techniques to ensure that the job was done correctly. I also cleaned up the area and made sure that the home was safe for the family to use again.